Here is the revised product title: "10Port PCIe to SATA Controller Expansion Card - PCI-E 3.0 SATA 3.0 X4 Interface with Bracket"

10Port PCIe to SATA Controller Expansion Card PCI-E3.0 SATA 3.0 X4 Interface with Bracket

Overview

This PCIe SATA card allows you to add 10 SATA 3.0 6Gbps devices to your computer, perfect for expanding your storage capacity.

Features:

• 10 Ports Adapter Card --- This PCIe SATA card allows you to add 10 SATA 3.0 6Gbps devices to your computer.
• Express X4 interface, Chip signal is 2X, compatible with PCI-Express X4 /X8 /X16 slots. (Recommended under PCI-E 3.0, faster use)
• The product chip using the JMB575+ASM1166 chip enhances heat dissipation, long-lasting high-temperature resistance, and more stable operation.
• Support system: WIN7/ WIN8 /WIN10/ LINUX.
• Support interface： There is an available PCI Express X4 slot while supporting PCI-E X4/ X8/ X16 (This SATA 3.0 expansion card is only suitable for motherboard slots via PCI-E . Do not apply to PCI slots).
• Comply with PCI-Express 3.0 specification and backward compatible with PCI-Express 2.0.
• Follow PCI-Express v2.0 specification and backward compatible with PCI-Express v1 .0.
• Supports 6.0 Gbit / s, 3.0 Gbit / s and 1.5 Gbit / s communication speeds
• Supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x and Gen 3i.
• Supports the AHCI1.0 mode and IDE mode
• Native command queue support (NCQ)
• Support FIS based on port multiplier switch or command switch.
• Support hot-swap.
• Compatible with SATA6G, 3G, and 1.5G hard drives
• Motherboard applicable slot PCI-Ex4 and above Note: PCI, PCI-E x1 cannot be used.
• RAID is not supported. The RAID in INTEL only applies to raw SATA. It is an expansion card that cannot support third-party chips.

**Summary:** This 10-port PCIe SATA controller expansion card supports 10 SATA 3.0 devices, with a fast Express X4 interface and compatible with PCI-Express X4/X8/X16 slots.

Important Information on Speed Description:

• The best effect can be achieved with the SATA3.0 data cable.
• PCI-E requires a slot above V2.0. For V1.0, the speed will not exceed 250M.
• Motherboard BIOS setting: SATA mode should be changed to AHCI.
• Although some motherboards are PCIe 2.0 versions, BOIS does not enable gen2 high-speed mode by default and needs to be turned on manually.
• The fastest speed of PCI-E 2.0 is 380-450 m/s.
• Different computer configurations and SATA SSDs have different speeds.

Package Includes:

• 1 x 10Port PCIe to SATA Controller Expansion Card
• 1 x Bracket