FeelElec FY8300S-20M 3-Channel 20MHz Arbitrary Waveform Signal Generator with TTL Level and VCO

FeelElec FY8300S-20M 20MHz 3-Channel Arbitrary Waveform Signal Generator with TTL Level & VCO

Features:

• Three independent channel outputs, can work in synchronization, with precisely adjustable phase difference.
• Adopting DDS direct digital synthesis technology to produce accurate, stable, and low-distortion output signals.
• Benchtop design with ABS plastic case, wide voltage supply from 100 to 240V (AC).
• Maximum output frequency 60MHz (sine wave), 250MSa/s sampling rate, 14bits vertical resolution.
• Long press the OK key during use, which can quickly save the current output parameter information, the next boot can automatically load the saved parameters.
• Standard channel tracking function, when the tracking is on, all the parameters of the three channels can be updated according to the user's configuration at the same time.
• Up to 98 groups of function/arbitrary waveforms can be output, including 34 groups of preset waveforms and 64 groups of user-defined waveforms.
• With 64 groups of arbitrary waveform storage bits, each storage depth of 8192 * 14bits.
• Output amplitude up to 24Vpp, amplitude resolution as small as 1mV (0.001V).
• DC bias function from -12V to +12V (<20MHz), resolution up to 1mV.
• Pulse waveform pulse width and pulse frequency are continuously adjustable, adjustable range of 20ns-1s. Pulse amplitude can be continuously adjusted between 0-12V, adjustable accuracy of 0.001V.
• With digital signal output function, can realize the amplitude of 0~12V at arbitrary CMOS level.
• VCO function: support VCO voltage control signal output function for each parameter (e.g. voltage controlled oscillator).
• Rich modulation types: AM, FM, PM, ASK, FSK and PSK modulation.
• 4-way TTL level outputs, synchronized outputs, each with precisely adjustable phase.
• Frequency measurement, period measurement, positive and negative pulse width measurement, and duty cycle measurement are four kinds of measurement methods.

Summary of Key Features:

• Three independent channel outputs
• DDS direct digital synthesis technology
• 60MHz maximum output frequency
• 98 groups of function/arbitrary waveforms
• VCO function and digital signal output
• Rich modulation types and measurement methods

Specification:

• Model: FY8300S-20M
• Material: ABS
• Sine: 0~20MHz
• Square: 0~20MHz
• Ramp, Triangle: 0~10MHz
• Pulse: 0~10MHz
• TTL/CMOS: 0~10MHz
• Arbitrary Waveform: 0~10MHz
• Minimum Pulse Width: 20ns (All models of pulse wave minimum width can reach 20ns)
• Min. Resolution on All Frequency Ranges: 1μHz
• Accuracy: ±20ppm
• Stability: ±1ppm/3 hours
• Waveform Characteristics
• Waveforms: Sine, Square, Rectangle (Duty Cycle adjustable), Pulse (Pulse width and cycle time can be set accurately), Triangle/Ramp, Sawtooth Wave, CMOS, Four channels TTL, DC, Half wave, Full wave, Positive Step, Inverse Step, Positive Exponent, Inverse Exponent, Lorenz Pulse, Multitone, Noise, ECG, Trapezoidal Pulse, Sinc Pulse, Narrow Pulse, Gauss White Noise, AM, FM, and other 64 sets customer-defined waveform.
• Non-Volatile Storage: Can storage 64 user-defined arbitrary waveforms, (8K 14 bits) * 64
• Waveform Length: 8192 points * 14bits
• Sampling Rate: 250MSa/s
• Vertical Resolution: 14 bits
• Sine: Harmonic Suppression: ≥50dBc (<1MHz); ≥45dBc (1MHz~20MHz); Total Harmonic Distortion: ＜0.5% (20Hz~20kHz, 0dBm)
• Rectangle: Rise/Fall Time: ≤15ns (VPP＜5V); Overshoot: ≤5%; Duty Cycle: 0.01%~99.99% (Resolution 0.01%)
• Sawtooth Wave: Linearity: ＞995 (0.01Hz~10kHz)
• Display: Type: 2.4 inch, TFT Color Display
• Save & Load: Amount: 12; Position: 01 to 12 (01 for start default value)
• Interface: Type: USB to Serial interface; Protocol: Command line mode, providing communication protocols; Communicating Speed: 115200bps (Industrial standard)
• Power: Voltage Range: AC 100V~240V
• Technic: SMD, LSI, Reliable and durable
• Buzzer: Can be turned on/off by setting
• Operation: Buttons and knobs continuously
• Environment: Temp: 0~40℃, Humidity: ＜80%
• Item Size: 205*187*76mm
• Package Size: 27.5*21*9.5cm

Package includes:

• 1 x Signal Generator
• 1 x Power Cord
• 1 x USB Data Cable
• 1 x BNC-BNC Cable
• 3 x Q9 Clip Cables