Fluke i400E 1-400A AC Current Digital Clamp Multimeter with Dual Banana Jacks

Fluke i400E 1~400A AC Current Digital Clamp Multimeter with Dual Banana Jacks

Features:

• Compact structure, specially designed to enhance functionality in a very compact format
• Wide Range, effective measurement range: 1A to 400A AC current.
• Accurate Result, the AC frequency range is up to 20kHz, the accuracy of which is up to 2.0%±5digits (45~65Hz) / 2.5%±5digits (65~400Hz).
• Convenient reading, 1mV/A output for convenient value reading
• High compatibility, compatible with most FLUKE mV AC measurement tools and multimeters.
• In wide applications, the ACE AC current clamp meter is an ideal tool for extended current measurement
• Applicable to power circuit measurement, malfunction analysis, a motor drive of frequency converter (or other electronics) measurement, power electronics equipment measurement, etc
• **Summary:** A compact and accurate AC current clamp meter with wide range and high compatibility, ideal for various applications.

Specification:

• AC current range: 1A to 400A
• Output signal: mV/A AC
• Accuracy: 2.0% ± 5 counts (45 Hz to 65 Hz); 2.5% ± 5 counts (65 Hz to 400 Hz)
• Typical bandwidth: 5Hz to 20kHz
• Working voltage: 600V AC RMS, in line with IEC 61010-1 and IEC 61010-2-030
• Load impedance: 1A to 400A
• Maximum non-destructive current: 600 A
• Inside diameter of jaw: 30 mm
• Maximum cable size: 600 MCM
• Standard plug: 19mm dual banana plug
• Rated grade: IEC 61010-1 and IEC 61010-2-030/IEC 61010-2-031 and
• IEC 61010-2-032: 600 V CAT II pollution degree 2
• Electromagnetic environment: IEC 61326-1: Portable
• Output cable length: 1M
• Operating temperature: -10°C to +50°C
• Storage temperature: -30°C to +60 ºC
• Relative humidity: ≤90% @10 °C to 530 °C;
• IP rating: IEC 60529: IP30, when the jaws are closed
• Temperature Coefficient: When the temperature is higher than 28 °C or lower than 18 °C, for each degree increase or decrease, 0.1 x the specified accuracy is increased
• Working altitude: ≤2,000 meters
• Storage altitude: ≤12,000 meters
• Vibration requirements: MIL-PRF-28800F, Class 2
• Drop test requirements: -10°C, 1M, 6 sides, oak
• Dimensions: 146*62*34mm
• Weight: 150g

Package includes:

• 1 x Clamp Multimeter