FNB38 Multifunction Meter: USB Tester for Current, Voltage & Fast Charging Protocol Testing

FNB38 Multifunction Current And Voltage Meter USB Tester for Fast Charging Protocol Test

Features:

• High reliability and security USB tester for detecting USB voltage and current, as well as a mobile communication terminal with fast charge triggers.
• USB 2.0 interface, 1.44 inch TFT LCD high definition display with integrated USB-A, Micro-USB, Type-C interfaces, use external 16-bit ADC, PD protocol physical chip.
• **Drive-free PC upgrade, PD E-Marker read, fast charge recognition, fast charge deception**
• PD protocol monitoring, PD protocol conversion, precision measurement.
• Data storage, intelligent recording of energy capacity detection.
• One screen display, multiple interfaces compatible.
• Can be used for fast charge protocol detection, QC2.0 trigger, QC3.0 trigger, for Huawei-FCP trigger, for Huawei-SCP trigger, for Samsung-AFC trigger, PD protocol trigger, and so on.

Specification:

• Material: ABS
• Color: black
• Input voltage: 4~24V
• Resolution: 0.1mV
• Accuracy: ±(0.2‰+2)
• Input current: 0~5A
• Resolution: 0.1mA
• Accuracy: ±(0.5‰+2)
• Input power: 0~120W
• Resolution: 0.1mW
• Accuracy: ±(0.5‰+2)
• Load equivalent internal resistance: 0~9999.9Ω
• Resolution: 0.1mΩ
• Accuracy: ±(0.5‰+2)
• D+/D- voltage: 0~3.3V
• Resolution: 0.01V
• Accuracy: ±(1.0%+2)
• Equipment temperature: ℃, ℉
• Capacity: 0~9999.9mAh
• Resolution: 0.0001mAh
• Accuracy: for reference
• Energy used: 0~9999.99Wh
• Resolution: 0.00001Wh
• Accuracy: for reference
• Cable internal resistance: 0~9999.9Ω
• Resolution: 0.0001Ω
• Accuracy: for reference
• Equipment runtime:
• Range: 999 hours 59 minutes 59 seconds
• Resolution: 1 second
• Accuracy: 5 seconds / hour
• Record time:
• Range: 999 hours 59 minutes 59 seconds
• Resolution: 1 second
• Accuracy: 5 seconds / hour

Package includes:

• 1 x USB tester

Notes:

• Do not connect a power supply exceeding 24V to the tester
• The FNB38 USB-A input port supports high-power input (such as 20V * 5A = 100W. The USB-A output port can withstand 5A current for a short time, The Micro-USB input port does not support large current and high power, and its input current cannot exceed 2.5A. When using high current and high power, it is recommended to use Type-C female output
• The HID-USB interface is only used for data transmission
• When using high voltage and high power, the temperature of the tester will rise. Please be careful to prevent burns
• When upgrading the firmware of the USB tester, you need to confirm the model first. Please do not use the firmware of other models to upgrade to avoid unexpected errors