High Sensitivity Wired Glass Break Sensor Glass Break Vibrator Wired Glass Break Shock Detector Home Alarm System Security

High Sensitivity Wired Glass Break Sensor Glass Break Vibrator Wired Glass Break Shock Detector Home Alarm System Security

Note: This wired glass break detector must be used with an alarm system.

Features:

• 8/12 bit microprocessor controlled digital signal processing (8MHz).
• Used to discriminate the sound of glass breaking or crashing from other sounds by frequency.
• It will not be fooled by the sound of pets or other sounds outside its frequency range.
• It will send a signal to the alarm system main unit when it detects a glass breaking sound.
• Adjustable sensitivity: covers up to 9m (30ft) when set high and up to 4.5m (15ft) when set low.
• 7 digital frequency filters, digital amplifier gain, and frequency fluctuation evaluation.
• Covers a large area of windows. Install on the ceiling or wall close to the window. 
• High immunity to RFI and EMI signals.

Specifications:

• Digital processor: 8/12 bit 8MHz
• Power supply: DC 9-16V, 17mA
• Alarm output: DC28V 0.15A, normally closed
• Tamper switch: DC28V 0.15A, normally closed, cover removed, normally open
• Protection range: Maximum sensitivity: 9 metres distance
• Sensitivity: Continuously adjustable 
• Window size: Glass of any size 
• Detection: Green LED on
• Alarm: Red LED on for 3s
• Material: ABS plastic 
• Operating temperature: -20°C to 50°C
• Operating humidity: 95%.
• Item size: Approx. 9 * 6.8 * 2.5cm(L*W*H)
• Item weight: Approx. 45g / 1.6oz

Package Information:

• Package Size: Approx. 9.5 * 7 * 3.3cm / 3.7 * 2.8 * 1.3in 
• Package Weight: Approximate. 54g / 1.9oz 

Package List:

• 1 * Wired glass sensor (no cable)