OPCOM 2014V 1.99 Diagnostic Tool for Opel Cars Tester

OPCOM 2014V 1.99 Diagnostic Tool Tester for Opel Car

Features:

• It covers almost all Opel cars, even new cars with CAN-BUS-based diagnostic, such as Vectra-C, Astra-H, Zafira-B
• The program lets you read out and clear fault codes, shows you live data, and lets you perform output test
• The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, and Body Control Unit, just to name a few examples
• Since Opel uses many pins in the OBD connector, the diagnostic interface works as a multiplexer and selects the appropriate pin for communication
• PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
• Fault codes will be shown with all available information
• Full Fault Code Text Description:
  • Full status information (Present, Not present, Intermittent)
  • You can print out, save, or copy the fault codes to any other application
  • From the fault codes window, you can go directly to the measuring blocks window
  • The program shows you measuring block information on many control modules, you can choose anything from the list on your own.
  • The program is capable of showing 8 measuring block parameters simultaneously
  • The sample rate depends mostly on the communication protocol
  • For example, older systems, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec or Bosch units are faster (using KWP-2000), and the newest CAN-based control units are very fast
  • HSCAN - Dual-wire, High-Speed CAN-BUS, 500 kbps
  • MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
  • SWCAN - Single-wire, Low-Speed CAN-BUS, 33.3 kbps

Package includes:

• 1 x OPCOM Interface
• 1 x USB Cable

Notes:

• OPCOM is a special PC Based diagnostic interface, especially for OPEL
• Firmware: V1.99
• Important:** Never Update It Online, It will damage the OP-COM
• Please use the computer system Win7 32bit or Win XP
• Warning:** DO NOT update the Firmware, otherwise, it will be damaged