TBK-318 3-in-1 Mobile Phone LCD Screen Separator with Preheater, OCA Glue, and Polarizer

Tbk-318 3-in-1 Mobile Phone LCD Screen Separator with Preheater and OCA Glue Polarizer

This 3-in-1 glue removal machine is a versatile tool for mobile phone LCD repair, consisting of a heated plate, vacuum manual separator, glue remover function, and built-in vacuum pump. Simply plug in the power line and you're ready to use it.

Specifications:

• Size: 200*330*350mm
• Net Weight: 9.5 kg
• Gross Weight: 10.5 kg
• Function: LCD Separate + OCA Glue remove + Polarizer remove + Preheater
• Working Voltage: AC 110V/AC 220V
• Power Supply: 350w
• Used: For Mobile Phone LCD Repair/Refurbishing/Degumming

Operation Steps:

Screen Separation:

• Haul back the lower plate, lock the screw tightly (skid resistance).
• Turn on the thermostat switch on left, setting the temperature to 80 degrees.
• Put the silica gel on the heated plate holes to holes.
• Put downwards the screen onto the silica gel, turn on vacuum switch, the screen being sucked.
• Adjust steel wire to the height of pressing the glass exactly.
• Keep a constant speed to separate LCD and glass.
• Take off the LCD, the operation steps of screen separation is.

Polarizer Remove:

• Turn on the thermostat switch on right, setting the temperature to 180 degrees.
• Put downwards the screen onto the silica gel, turn on the vacuum switch, the screen is sucked.
• Put the blade on one end of the polarizer, push the plate, and then the polarizer will fall off.
• Turn down the vacuum switch and take out the screen.

Package Includes:

• 1 x TBK-318
• 1 x Power cable

Features:

• 3-in-1 design: LCD separator, OCA glue remover, and polarizer remover in one machine
• Easy to use: Simple operation steps and intuitive design
• Versatile: Suitable for mobile phone LCD repair, refurbishing, and degumming