Tooltop ET2010A 2.5MHz 2-in-1 Digital Oscilloscope & 600V True RMS Multimeter with Data Storage

Tooltop ET2010A 2-in-1 Digital Display 2.5MHz Data Storage Oscilloscope 600V True RMS Multimeter

Features：

• 2.5Msps high-speed sampling, 1MHz analog bandwidth, 4000 count digital multimeter.
• One-click visual wave, there are three waveform scanning modes: Automatic/Conventional/Single
• Save function for data and waveform in the measurement; A total of 100 sets of data and 10 waveforms can be saved
• When measuring waveforms, you can set parameters independently, such as time base, amplitude, waveform scanning mode, etc
• REL, effectively eliminates the lead resistance, distributed capacitance, and interference signal
• Multimeter functions include DC/AC voltage/current, resistance, capacitance, frequency, duty cycle, diode continuity test
• Automatic/manual switching for measuring range and display of measurement data and historical data on the same screen
• Overload protection 10A double protective tube, dual protection of the instrument
• Automatic shutdown in case of no operations for 15 minutes: bright backlight and clear display
• Adopt a 2.4-inch color screen display, the display effect is clear
• Higher reliability: No adjustment of the potentiometer is required for panel calibration and internal storage calibration
• Summary:** 2-in-1 digital display oscilloscope with data storage and multimeter functions, featuring high-speed sampling, waveform scanning, and automatic measurement.

Specification:

• Display: 240x320 Color screen
• Backlight: Constantly on
• Battery: AA batteries *3 (Not included)
• Working current: About 65mA
• Usage time: More than 10 hours
• Use: 0°C~40°C; <75%RH
• Dimensions: 77*157*25.5mm
• Observation area: 49.0*36.7 mm
• Input resistance: About 10MΩ
• Auto shutdown: 15 minutes or disabled
• Sleep current: About 35uA
• Storage capacity: 100*data, 10*waveform
• Storage: -10°C~60°C; <90%RH
• Weight: About 135g

Oscilloscope:

• Analog bandwidth: 1MHZ
• Channel: 1
• Scan mode: Auto/normal/single
• Vertical sensitivity range: 300mV~100V per grid
• Vertical amplitude accuracy: ±(5%+0.2div)
• Auto-configuration: Auto set time base and vertical amplitude
• Max real-time sampling rate: 2.5Msps
• Input resistance: About 10MΩ
• Time base range: 2.5us~10s per grid
• Time base accuracy: ±(0.01%+0.1div)
• Trigger edge selection: Rising/falling edge
• Automatic measurement function: Vp-p, Vavg, Vrms, HZ

Multimeter:

• DC Voltage: 400mV~600V
• DC Current: 4A~10A
• Resistance: 400.0Ω~40.00MΩ
• Frequency: 5Hz~5MHz
• Diode test: Voltage is about 1.5V
• AC Voltage: 400mV~600V
• AC Current: 4A~10A
• Capacitance: 51.2nF~100uF
• Duty cycle: 0%~100%
• Continuity test: Resistance <50Ω, beep

Package includes:

• 1 x Oscilloscope Multimeter(Random Color)
• 1 x Test Leads