Here is the rearranged product title: "USB to RS485 / 422 Industrial Isolated Converter Module"

USB to RS485 / 422 Industrial Isolated Converter Module

Features:

• Adopting the original imported FT232RNL+SP485EEN chip program, high-speed communication is stable, reliable, good compatibility
• On-board integrated power isolation, can provide stable isolation voltage, isolated end without additional power supply
• On-board integrated digital isolation, signal isolation, high reliability, strong anti-interference, low power consumption
• On-board TVS (transient voltage suppressor), can effectively inhibit the surge voltage and transient spike voltage in the circuit, lightning, and static electricity
• On-board self-recovery fuses and protection diodes can ensure stable output of current and voltage, prevent overcurrent and overvoltage, and improve shock resistance
• On-board 15KV ESD isolation protection and 600W lightning surge protection
• Built-in RS485/RS422 output termination 120R resistor, which can be enabled by jumper cap, and flexible switching
• 3 external LED indicators, easy to check the power supply and signal sending/receiving status
• Industrial rail type ABS environmentally friendly housing, compact size, easy to install, cost-effective
• Summary:** High-speed communication, stable, reliable, and good compatibility, with advanced protection features and easy installation.

Specification:

• Product Type: Industrial Isolated USB to RS485/422 Converter
• Communication rate: FT232RNL 300bps ~ 3Mbps
• Host interface: USB
• Device Interface: RS485/422

USB interface:

• Operating Level: 5V
• Interface Format: USB-B type interface
• Interface protection: 200mA self-recovery fuse, ESD static protection
• Transmission distance: approx. 5 metres

RS485/422 interface:

• Interface: Terminal block
• Interface pins: A+, B-, PE
• Direction control: Hardware automatically determines and controls the direction of data transmission
• Interface protection: 600W lightning, surge and 15KV electrostatic protection (on-board 120R balancing resistor)
• Transmission Distance: Approx. 1200 metres (at low rates)
• Transmission Mode: Point-to-Multiple (up to 32 nodes, repeaters recommended for more than 16 nodes)

Indicator light:

• PWR: Power indicator, when connected to USB and voltage is detected, the light will be red
• TXD: Transmit indicator, green light when there is data sent from the USB port
• RXD: Receive indicator, blue light when there is data sent back from the device interface

Package includes:

• 1 x Module
• 1 x Cable